Tektronix 5441 Instruction Manual page 17

Operating Information-54411115441
Storage Operation (Without Variable Persistence)
26. Press the ERASE button and note that the stored
waveform is erased. Another display can be stored by
24. Rotate the VARIABLE PERSIST control to its fully
pressing the Reset button on the time-base plug-in,
counterclockwise position and release the SAVE button to
its off (button 0ut)'position.
27. Turn the READOUT INTENS control slowly clock-
wise to the point where the stored readout information
25. Press the Reset button on the time-base plug-in.
spread.
One sweep will be generated, and a display should be visi-
ble. Increase the WRITING SPEED setting-if a brighter dis-
play is required. If there is no display visible, increase the
INTENSITY control setting and press the Reset button.
REV MAY 1982