F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 83

Incoming E-mail Scanning
In the Incoming E-mail Scanning section you can:
Enable incoming e-mail scanning.
Select the action to take on incoming infected attachment.
Select the action to take on scanning failure.
Select the action to take on malformed message parts.
Outgoing E-mail Scanning
In the Outgoing E-mail Scanning section you can:
Enable outgoing e-mail scanning.
Select the action to take on outgoing infected attachment.
Select the action to take on scanning failure.
Select the action to take on malformed message parts.
Select to save the blocked messages in the end user's outbox.
General
In the General section you can:
Select whether all or just some attachments are scanned. You
can also add new extensions in the Included extensions list.
Select whether e-mail scanning also scans compressed
attachments.
Select whether certain extensions will be excluded from the scan
and define what they are.
Select whether scanning progress is shown and define the time
after which it is shown.
Select whether scanning report is shown if infected e-mails are
found or if scanning fails.
For configuration examples and more information, see
E-mail Scanning", 172.
CHAPTER 3 83
"Configuring