F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 189

<host>[:<port>] where "host" is the DNS-name or IP-address of the
SMTP server, and "port" is the SMTP server port number.
2. Enter the sender's address for e-mail alert messages in the E-mail
sender address (From): field.
3. Enter the e-mail alert message subject in the E-mail subject: field.
See the MIB help text for a list of possible parameters to use in the
message subject.
Step 3. Set up E-mail Alert Forwarding
The Alert Forwarding table is used to configure where different types of
alerts are to be forwarded.
1. Select the E-mail check box on the Security Alert row. This opens the
E-mail Recipient Addresses (To) dialog box.
2. Select the Use the same address for all products check box, and
enter the e-mail address in the field that is activated. If you want the
alerts to be sent to several e-mail addresses, separate them by
commas. When finished, click OK.
3. Click
4. Click
to save the policy data.
to distribute the policy.
CHAPTER 5 189