F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 290

290
[FWESINST.DLL]
RequestInstallMode=1
Debug=0 | 1
InstallMode=0 | 1
[FWINST.DLL]
RequestInstallMode=1
Debug=0 | 1
InstallMode=0 | 1
Settings for internal common component FWES.
0 = Install this component as defined in the InstallMode
setting.
1 = Install this component if newer, or not installed (default).
2 = Install this component if there is no existing version of it
installed, or if the same or an older version exists.
0 = Do not generate debug information. (default)
1 = Write debug information into the debug log during
installation and uninstallation.
0 = Do not install this component. (default)
1 = Install this component, except if a newer version already
exists.
Settings for F-Secure Client Security - Internet Shield
0 = Install this component as defined in the InstallMode
setting.
1 = Install this component if newer, or not installed (default).
2 = Install this component if there is no existing version of it
installed, or if the same or an older version exists.
0 = Do not generate debug information. (default)
1 = Write debug information into the debug log during
installation and uninstallation.
0 = Do not install this component. (default)
1 = Install this component, except if a newer version already
exists.