F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 288

288
[FSAVINST.DLL]
EnableRealTimeScanning=1
Debug=1
InstallMode=0 | 1
[FSSGSUP.DLL]
RequestInstallMode=1
Debug=0 | 1
InstallMode=0 | 1
SidegradeAction=0
Settings for F-Secure Client Security - Virus
Protection
0 = Disable real-time scanning
1 = Enable real-time scanning (default).
0 = Do not generate debug information. (default)
1 = Write debug information into the debug log
during installation and uninstallation.
0 = Do not install this component. (default)
1 = Install this component, except if a newer
version already exists.
Settings for conflict detection and removal
module
This component is always run during the
installation. You do not need to edit the
RequestInstallMode or InstallMode settings for
this component
0 = Do not generate debug information. (default)
1 = Write debug information into the debug log
during installation and uninstallation.
This component is always run during the
installation. You do not need to edit the
RequestInstallMode or InstallMode settings for
this component
0 = Remove all found conflicts automatically.
(default)
1 = Cancel installation if any conflicting software
is found installed.