Allowing The Use Of A Spyware Or Riskware Component - F-SECURE CLIENT SECURITY 8.00 Administrator's Manual

186
5.8.4

Allowing the Use of a Spyware or Riskware Component

4. As the manual scanning task also includes manual virus scanning,
check the settings in the Manual Virus Scanning section, and modify
them if necessary.
5. Go to the Operations tab, and click the
Spyware button. Note, that you have to distribute the policy for the
operation to start.
6. Click to save the policy data.
7. Click to distribute the policy.
In this example the use of a spyware or riskware component that was
found during the spyware scanning is allowed for one host.
1. In the Policy Domains tab select the host for which you want to allow
the use of spyware or riskware.
2. Go to the Settings tab and select the Spyware Control page.
3. Select the spyware component the use of which you want to allow in
the Spyware and Riskware Reported by Hosts table, and click
Application.
4. A dialog asking your to confirm the action is opened. Check the
information displayed in the dialog, and if you are sure you want to
allow the application to run on the host or domain, click OK.
5. The selected application will be moved into the Applications Excluded
from Spyware Scanning table.
6. Click to save the policy data.
7. Click to distribute the policy.
Scan for Viruses and
Allow