F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 292

292
[FSPSINST.DLL]
RequestInstallMode=1
Debug=0 | 1
InstallMode=0 | 1
DisableScanningForApps=
Wget.exe,mplayer.exe
EnableHTTPScanning=1
StartImmediatelyForApps=
iexplore.exe,firefox.exe,
netscape.exe,opera.exe,
msimn.exe,outlook.exe, mozilla.exe
Settings for F-Secure Client Security - Network Scanner
0 = Install this component as defined in the InstallMode
setting.
1 = Install this component if newer, or not installed (default).
2 = Install this component if there is no existing version of it
installed, or if the same or an older version exists.
0 = Do not generate debug information. (default)
1 = Write debug information into the debug log during
installation and uninstallation.
0 = Do not install this component. (default)
1 = Install this component, except if a newer version already
exists.
Disables Network Scanning for certain executables.
This is a comma-separated list of executable names without
paths.
Note: No spaces are allowed between the items.
0 = HTTP Scanning disabled
1 = HTTP Scanning enabled
This setting defines which executables should start HTTP
scanning immediately. Other processes will go in scanning
mode only after the first access to an external server port 80.
This is a comma-separated list of executable names without
paths.
Note: No spaces are allowed between the items.