F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 267

3. Select the Policy tab in the Properties pane (the middle pane).
4. On the Policy tab, select the following path:
\F-Secure\F-Secure Internet Shield
5. In the Product View pane (on the right) select the Security Level
Autoselection page.
6. Make sure that Security Level Autoselection is enabled. To enable
Security Level Autoselection, select User can change or Admin full
control from the Autoselect Mode drop-down list.
7. Click Add to add the first security level, in this example Office.
8. You can enter the data in the cells by selecting a cell and clicking
Edit. For the Office security level you should add the following data:
Priority: The rules are checked in the order defined by the priority
numbers, starting from the smallest number.
Security level: Enter the ID (composed of number and name) of
the security level here; for example: 40office.
Method 1: Select DNS Server IP Address from the drop-down list.
Argument 1: Enter the IP address of your local DNS server here;
for example: 10.128.129.1.
Method 2: Select Default Gateway IP Address from the
drop-down list.
Argument 2 = Enter the IP address of you default gateway; for
example: 10.128.130.1.
You can only use one argument, for example one IP address, in the
Argument field.
If there are several default gateways in use in your company, and
you want to use all of them in the security level autoselection, you
can create a separate rule for each of them in the table.
CHAPTER 13 267