F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 200

200
3. Disable the BrowserSecurity security level by clearing the Enabled
check box beside it in the Firewall Security Levels table.
4. Select the subdomain where you want to use this security level in the
Policy Domains tab.
5. Enable the BrowserSecurity security level by selecting the Enabled
check box beside it in the Firewall Security Levels table.
6. Set the new security level as the active security level by selecting it
from the Internet Shield Security level at host drop-down list.
7. Click to save the policy data.
8. Click to distribute the policy.