F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 287

[PMSUINST.DLL]
RequestInstallMode=0
FsmsServerUrl=http://fsmsserver
FsmsExtensionUri=/fsms/fsmsh.dll
FsmsCommdirUri=/commdir
Debug=1
InstallMode=0 | 1
[FSAVINST.DLL]
RequestInstallMode=1
Settings for F-Secure Policy Manager support
This component is always installed when you are
installing a networked client. You do not need to
edit the RequestInstallMode or InstallMode
settings for this component.
URL to the F-Secure Policy Manager Server.
Do not change this setting.
Do not change this setting.
0 = Do not generate debug information. (default)
1 = Write debug information into the debug log
during installation and uninstallation.
This component is always installed when you are
installing a networked client. You do not need to
edit the RequestInstallMode or InstallMode
settings for this component.
Settings for F-Secure Client Security - Virus
Protection
0 = Install this component as defined in the
InstallMode setting.
1 = Install this component if newer, or not installed
(default).
2 = Install this component if there is no existing
version of it installed, or if the same or an older
version exists.
APPENDIX A 287