F-SECURE CLIENT SECURITY 8.00 Administrator's Manual page 40

40
Step 8.
Select the F-Secure Policy Manager Server modules to enable:
Host module is used for communication with the hosts. The
default port is 80.
Administration module is used for communication with F-Secure
Policy Manager Console. The default HTTP port is 8080.
If you want to change the default port for communication,
you will also need to change the HTTP Port Number setting
in F-Secure Policy Manager Console.
By default the access to the Administration module is restricted to
the local machine. This is the most secure way to use the
product.
When using a connection over a network, please consider
securing the communication with F-Secure SSH.
For environments requiring maximum security, see section
Installing F-Secure Policy Manager in High Security
Environments in F-Secure Policy Manager Administrator's
Guide.
Web Reporting module is used for communication with F-Secure
Policy Manager Web Reporting. Select whether it should be
enabled. Web Reporting uses a local socket connection to the
Admin module to fetch server data. The default port is 8081.
By default access to Web Reports is allowed also from other
computers. If you want to allow access only from this computer,
select Restrict access to the local machine.