Labconco Protector 4882200 User Manual page 46

Chapter 7: Modifying Your Protector Radioisotope Fume Hood
42
Sash Stop Kit – Field
Installation
The Sash Stop P/N 9724500 restricts how far a vertical-
rising sash may be opened. This small plastic device
may be easily field installed on the fixture corner post
of any fume hood. The metal bracket is simply mounted
to the sash handle.
Figure 7-7
Installing an Electrical
Duplex Outlet
Your Protector Radioisotope Fume Hood can be ordered
with duplex outlets, however, if you ordered a model
without an electrical duplex outlet you can have one
installed in the field by a qualified electrician. Contact
Labconco Customer Service for ordering information.
(Not acceptable on explosion-proof hoods).
Figure 7-8
Product Service 1-800-522-7658