Advertisement
C
C
H
A
P
T
H
A
P
T
P
P
R
E
R
E
R
E
R
E
Before you install your laboratory fume hood, you need
to prepare your site for installation. Carefully examine
the location where you intend to install your hood. You
must be certain that the area is level and of solid
construction. In addition, a dedicated source of
electrical power must be located near the installation
site.
Carefully read this chapter to learn the requirements for
your installation site:
• The location requirements.
• The support requirements.
• The exhaust requirements.
• The optional filter pack requirements.
• The electrical power requirements.
• The service line requirements.
• The space requirements.
Refer to Appendix B: Protector Radioisotope Hood
Dimensions for complete fume hood dimensions.
Refer to Appendix C: Protector Radioisotope Hood
Specifications for complete laboratory fume hood
electrical and environmental conditions, specifications
and requirements.
Product Service 1-800-522-7658
2
2
E
R
E
R
Q
U
I
S
I
T
E
S
Q
U
I
S
I
T
E
S
7
Advertisement
Need help?
Do you have a question about the Protector 4882200 and is the answer not in the manual?