Labconco Protector 4882200 User Manual page 8

Chapter 1: Introduction
!
4'
5' 6'
8'
S
A
4
• Critical information is presented in boldface type in
paragraphs that are preceded by the exclamation
icon. Failure to comply with the information
following an exclamation icon may result in injury
to the user or permanent damage to fume hood.
• Critical information is presented in boldface type in
paragraphs that are preceded by the wrench icon.
These operations should only be performed by a
trained certifier or contractor. Failure to comply
with the information following a wrench icon may
result in injury to the user or permanent damage to
your hood.
• Important information is presented in capitalized
type in paragraphs that are preceded by the pointer
icon. It is imperative that the information contained
in these paragraphs be thoroughly read and
understood by the user.
• A number icon precedes information that is specific
to a particular model of laboratory fume hood. The
4' icon indicates the text is specific to the 4-foot
wide model. The 5' icon indicates the text is
specific to the 5-foot model, etc.
• The S icon indicates the text is specific to the
standard model.
• The A icon indicates the text is specific to the A-
Style Combination Sash Model.
Your Next Step
If your Fume Hood needs to be installed, proceed to
Chapter 2: Prerequisites to ensure your installation site
meets all of the requirements. Then, go to Chapter 3:
Getting Started for instructions on how to install your
laboratory fume hood and make all of the necessary
connections.
If you would like to review how laboratory fume hoods
operate, go to Chapter 4: Performance Features and
Safety Precautions.
For information on the operational characteristics of
your laboratory fume hood, go to Chapter 5: Using
Your Protector Radioisotope Hood.
Product Service 1-800-522-7658