Racelogic VB2SX10 User Manual page 52

6. Heading, 0.01° per bit.
7. Altitude, 0.01 m per bit, signed.
8. Vertical Velocity, 0.01 m/s per bit, signed.
9. Status. 8 bit unsigned char. Bit 0=VBOX Lite, Bit 1=Open or Closed CAN Bus (1=open), 2=VBOX3.
10. Status is an 8 bit unsigned char. Bit 0 is always set, Bit 3=brake test started, Bit 4 = Brake trigger active, Bit 5 =
DGPS active.
11. Distance, 0.000078125 m per bit, unsigned.
12. Longitudinal Acceleration, 0.01 g per bit, signed.
13. Lateral Acceleration, 0.01 g per bit, signed.
14. Distance travelled in meters since VBOX reset.
15. Time from Trigger event to Zero km/h.
16. Velocity at brake trigger point in Knots.
17. True Heading of vehicle, 16-bit signed integer * 100.
18. Slip Angle, 16-bit signed integer * 100.
19. Pitch Angle, 16-bit signed integer * 100.
20. Lateral Velocity, 16-bit signed integer * 100.
21. Yaw Rate, 16-bit signed integer * 100.
22. Roll Angle, 16-bit signed integer * 100 **VB20SL3 units only
User_Guide_VBOX_II_(VB2SX5%2C_VB2SX10%2C_VB20SL3)/15_-_VBOX_II_Technical_Properties/VBOX_II_CAN_Output
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II/Discontinued_VBOX_II_versions/
52