To Use The Adaptors With The Infant Carrier - Britax STRIDER PLUS Manual

SECOND SEAT ASSEMBLY & OPERATION
31. TO USE THE SECOND SEAT - CONTINUED

31.10 To use the adaptors with the Infant Carrier.

NOTE: Adaptors are supplied to create more space if required, when using the Second Seat.
For correct connection to the Stroller frame, the adaptors move the Infant Carrier mounting
closer to the front of the Stroller.
DO NOT install the Infant Carrier in a forward facing position, even when used in conjunction
with the Second Seat. The Infant Carrier must always face rearward.
A
Align the adaptor with
the Stroller frame mouldings
as shown, and ensure the
adaptor extends towards
the front of the Stroller and
the ribbed section of the
mouldings face inwards.
D
Lock the Infant Carrier
into the adaptors, with
the Infant Carrier facing
towards the Stroller handle.
WARNING: Infant Carrier
must be correctly attached,
refer to section 29.
46
S9
B
Press down on the
adaptors to lock into the
Stroller frame mouldings
(S9).
E
Pull up on the Infant
Carrier to make sure it is
locked in.
S9
S9
C
Pull up on the adaptors
to make sure they are
locked on.