Install The Infant Carrier (Sold Separately) - Britax Agile Plus User Instructions

18. INSTALL THE INFANT CARRIER (Sold Separately)

WARNINGS
• THE STEELCRAFT INFANT CARRIER IS THE ONLY INFANT CARRIER
DESIGNED TO FIT THIS STROLLER.
• THE INFANT CARRIER MUST BE CORRECTLY FITTED AND LOCKED
ONTO THE STROLLER.
• THE INFANT CARRIER MUST ONLY BE USED IN THE REARWARD
FACING POSITION, FITTED TO THE STROLLER FACING TOWARD
THE STROLLER HANDLE.
• SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
• DO NOT LEAVE THE CHILD IN THE INFANT CARRIER FOR EXTENDED
PERIODS.
• THE INFANT CARRIER IS DESIGNED TO PROVIDE MOBILITY OUTSIDE
OF THE CAR BUT IT SHOULD NOT BE USED INSTEAD OF AN
APPROPRIATE COT.
• THE INFANT CARRIER MUST BE REMOVED FROM THE FRAME
BEFORE FOLDING.
• THE MAXIMUM WEIGHT OF THE CHILD USING THIS PRODUCT IS
NOT TO EXCEED 9kg.
Please Note: These Instructions are for installing and removing the Infant
Carrier on the stroller only.
For installing and proper care of the Infant Carrier in the car please follow
the Instruction book that is included with the Infant Carrier.
www.britax.com.au
25