Related Manuals for Britax Steelcraft Zapo
Summary of Contents for Britax Steelcraft Zapo
- Page 1 ZAPO LAYBACK STROLLER IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE. www.britax.com.au Series SY66A...
- Page 2 IMPORTANT NOTES IMPORTANT NOTES: ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS STROLLER. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. • USE GREAT CARE WHEN USING THE STROLLER ON STAIRS, ESCALATORS, TRAVELATORS OR OTHER MOVING SURFACES.
- Page 3 • MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER. • DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED FOR USE WITH THIS STROLLER BY BRITAX. • IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH THIS STROLLER.
-
Page 4: Manual Handling Techniques
MANUAL HANDLING TECHNIQUES The SMART lifting technique This technique can be used to pick up small light loads from low levels. Size up the Load • Assess the load (size, shape and weight). • Assess whether the load needs to be moved; •... -
Page 5: Parts List
PARTS LIST A 1 x Stroller Frame, Seat & Basket B 1 x Canopy C 2 x Rear Wheels D 2 x Front Wheels E 1 x Arm Bar F 1 x set of Shoulder Pads G 1 x Rain Cover H 1 x Travel Bag... -
Page 6: Stroller Assembly
STROLLER ASSEMBLY OPENING THE STROLLER FRAME PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES. IMPORTANT NOTES: • RELEASE THE STORAGE LATCH WITH DUE CARE AND OPEN THE FRAME. • WHEN OPENING THE STROLLER, BE AWARE OF THE DANGER OF BEING INJURED BY MOVING PARTS AND LOCKING DEVICES DURING THE PROCESS. - Page 7 STROLLER ASSEMBLY OPENING THE STROLLER FRAME click click click press click...
-
Page 8: Important Note
STROLLER ASSEMBLY ATTACHING AND REMOVING THE ARM BAR IMPORTANT NOTE: WHEN A CHILD IS IN THE STROLLER IT IS RECOMMENDED THAT THE ARM BAR IS ATTACHED TO THE STROLLER AT ALL TIMES. A Insert the arm bar mouldings into the sockets on each side of the stroller frame and push down on the arm bar until a ‘click’... - Page 9 STROLLER ASSEMBLY ATTACHING AND REMOVING THE ARM BAR press press...
- Page 10 STROLLER ASSEMBLY ATTACHING THE CANOPY IMPORTANT NOTE: The sun is very strong. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. The canopy or hood on this product will not give your child total protection from the harmful rays of the sun. A Position the canopy side on to the stroller frame &...
-
Page 11: Attaching The Canopy
STROLLER ASSEMBLY ATTACHING THE CANOPY C Attach the canopy to the other side of the stroller frame by pushing the canopy bracket onto the stroller frame until the bracket clasp fastens onto the frame. D Pull the canopy up the stroller frame so the canopy brackets connect with the locking pins on the inside of the stroller frame. - Page 12 STROLLER ASSEMBLY ATTACHING THE CANOPY E Locate the snap fasteners on the edge of the canopy back flap and press each fastener to the snap fasteners on the backrest. Secure each side of the canopy back flap to the side of the stroller with the hook and loop tabs.
- Page 13 STROLLER ASSEMBLY ATTACHING THE REAR & FRONT WHEELS B To attach the front swivel wheel assembly, insert the swivel wheel assembly and push it into the wheel moulding until you hear a ‘click’ which indicates the wheel is locked in. Pull on each wheel to make sure it is engaged.
- Page 14 STROLLER ASSEMBLY ATTACHING THE RAIN COVER IMPORTANT NOTE: ENSURE THE RAIN COVER IS KEPT AWAY FROM THE CHILD’S FACE. REFIT THE RAIN COVER IF REQUIRED TO ENSURE YOUR CHILD IS SAFE. A Pull the rain cover over extended canopy and push the back flap of rain cover through the handle opening.
- Page 15 STROLLER OPERATION USING THE BRAKES WARNING ALWAYS APPLY THE BRAKES WHEN THE STROLLER IS STATIONARY. A To lock the rear wheels, press the brake lever down until you hear a ‘click’ . Push the stroller back and forth to confirm the wheels are locked.
-
Page 16: Using The Swivel Wheels
STROLLER OPERATION USING THE SWIVEL WHEELS PLEASE NOTE: Always lock the swivel wheels when using the stroller on rough surfaces as this will minimise wheel wobble. The swivel wheels should only be locked when the wheels are in the trailing position (wheels under frame). A To lock the front wheels into the fixed position, press the swivel lock down until you hear a ‘click’... -
Page 17: Stroller Operation
STROLLER OPERATION ADJUSTING THE BACKREST WARNINGS: • THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WITH CHILDREN LESS THAN 6 MONTHS OLD. • THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE BACKREST CAN BE ADJUSTED TO A MORE UPRIGHT POSITION AS THE CHILD GROWS OLDER AND IS ABLE TO SUPPORT ITS HEAD WITHOUT ASSISTANCE. -
Page 18: Adjusting The Backrest
STROLLER OPERATION ADJUSTING THE BACKREST Recline adjuster Release lever... -
Page 19: Important Notes
STROLLER OPERATION ADJUSTING THE LEG REST IMPORTANT NOTES: • THE LEG REST FEATURE IS PROVIDED FOR YOUR CHILD'S COMFORT. • THE LEG REST IS NOT DESIGNED TO SUPPORT EXTRA WEIGHT. • DO NOT ALLOW CHILDREN TO STAND OR SIT ON THE LEG REST. IT WILL DISENGAGE IF EXTRA WEIGHT IS APPLIED. -
Page 20: Adjusting The Leg Rest
STROLLER OPERATION ADJUSTING THE LEG REST click... - Page 21 STROLLER OPERATION USING THE HARNESS WARNING: USE THE HARNESS AT ALL TIMES. • ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS. • THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD. • NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN THE STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY POSE A STRANGULATION HAZARD.
-
Page 22: Using The Harness
STROLLER OPERATION USING THE HARNESS A Always apply the brakes. Place child in seat. Slip one shoulder strap over each shoulder. Position crotch strap between legs. Push the buckle tongues (A) on waist straps through the tongue guides (B) on shoulder straps. - Page 23 STROLLER OPERATION USING THE HARNESS C Press in and hold the centre crotch buckle button and insert the waist buckle tongues into the crotch buckle assembly. IMPORTANT: Pull on each waist buckle tongue to make sure they are locked into the crotch buckle assembly. If not, repeat above procedure.
- Page 24 STROLLER OPERATION USING THE HARNESS E Tighten or loosen the waist straps, hold and lift the 4 bar harness adjuster and pull the harness strap to adjust to the desired fit. The waist strap needs to fit firmly around the child. 4 bar harness adjuster...
- Page 25 STROLLER OPERATION USING THE HARNESS G The stroller seat has 3 sets of harness slots at different heights to accommodate the child. The shoulder straps must be positioned near the child’s shoulders. To change the shoulder harness height, push the shoulder harness tongue out of the current harness slot and through the back of the seat and then pull the shoulder harness buckle tongue through the desired slot.
- Page 26 STROLLER OPERATION USING THE TETHER STRAP WARNINGS: USE THE TETHER STRAP TO STOP THE STROLLER ROLLING AWAY. • THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES AND USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER.
- Page 27 STROLLER OPERATION USING THE STROLLER PLEASE REFER TO PAGE 4 FOR LIFTING TECHNIQUES. • Always ensure you bend your knees where appropriate and take due care when lifting the frame. • With your hand through the wrist tether strap loop, push the stroller holding the handle.
- Page 28 STROLLER OPERATION FOLDING THE STROLLER PLEASE REFER TO PAGE 4 FOR LIFTING TECHNIQUES. IMPORTANT NOTES: • REMOVE THE CHILD FROM THE STROLLER BEFORE COMMENCING ANY FOLDING OPERATION. • FOLD THE STROLLER SLOWLY AND BE CAREFUL WHERE YOU PLACE YOUR HANDS. •...
-
Page 29: Folding The Stroller
STROLLER OPERATION FOLDING THE STROLLER F Press in the adjuster buttons on the inside of each handle moulding at the same time and lower the handle down towards the backrest until a ‘click’ is heard on both sides of the handle. The handle should be folded flat against the backrest. - Page 30 STROLLER OPERATION FOLDING THE STROLLER G Pull up on the folding strap as shown by the arrow. The stroller will now fold. H Lock the frame with the storage latch. PLEASE NOTE: The stroller can be placed in the travel bag for storage & easy transport.
- Page 31 STROLLER OPERATION FOLDING THE STROLLER I Before placing the stroller in the travel bag, you will need to remove the rear wheels (Refer to Page 13) and the arm bar (Refer to Page 8). After removing the wheels and arm bar, place the stroller inside the travel bag and then pack the wheels and arm bar in the bag.
-
Page 32: Lifting And Carrying The Stroller
STROLLER OPERATION LIFTING AND CARRYING THE STROLLER... - Page 33 NOTES...
- Page 34 NOTES...
-
Page 35: Care And Maintenance
CARE AND MAINTENANCE • To prolong the life of your stroller keep it clean and do not leave it in the direct sunlight or in the car boot for extended periods of time. • Removable fabric covers and trims may be cleaned using warm water with a household soap or mild detergent. - Page 36 CUSTOMER SERVICE 1300 303 330 - Australia 0508 688 822 - New Zealand Due to our continuing program of development, Britax reserves the right to alter the specifications, color or design without any further notice. The Steelcraft trademark is the property of Britax Childcare Pty.Ltd - Australia.