Britax STRIDER PLUS Manual page 33

INFANT CARRIER ASSEMBLY & OPERATION
29. INFANT CARRIER FITTING AND REMOVAL - CONTINUED
C
By squeezing in
and holding the latches
on either side of the
handle, rotate the handle
backwards. The GREEN
Indicator will now turn to
RED.
F
IMPORTANT: Pull
up on both sides of the
Infant Carrier and confirm
it is locked into the frame.
If not locked in on both
sides, repeat steps A to E.
D
Release the handle
latches. Then with one
hand holding the front of
the Infant Carrier, push the
Infant Carrier handle all the
way down until you hear it
lock into the frame.
G
Secure your baby into
the Infant Carrier by the
harness provided.
E
The handle indicator
should now be GREEN and
the Infant Carrier should
be locked into the frame. If
indicator is RED the Infant
Carrier handle is not in the
locked position, repeat
step D.
H
To remove the Infant
Carrier, squeeze both
handle latches in to release
the locks. The indicator will
now be RED.
33