Tether Strap; To Fit The Reversible Seat Pad - Britax STRIDER PLUS Manual

STROLLER ASSEMBLY & OPERATION

19. TETHER STRAP

WARNING: Use the tether strap to prevent the Stroller from rolling away.
NOTE: A tether strap is fitted to this Stroller, always place the loop over desired wrist when
using the Stroller.
A
If the tether strap
is removed, attach by
looping over the handle,
open one end of the
tether strap and insert
the opposite end through
the opening created. Pull
until tether strap tightens
around handle.

20. TO FIT THE REVERSIBLE SEAT PAD

NOTE: To assit with installing, release one side of the armbar, see item 12D and release the
harness buckles.
A
Fit the reversible seat
pad by sliding it under the
harness and head pillow.
Note: Locate wider part of
pad towards the head.
B
Slide your hand
through the tether strap
whenever you use the
Stroller. Hint: If tether strap
is fitted in the centre of the
handle, you can use it with
either hand.
B
Locate the reversible
seat pad as shown.
C
If you want to use
the tether strap with the
other hand, slow to a stop
and apply the brake (see
section 8). Loosen the
tether strap and slide to
the desired side of the
handle. Slide your hand
through the tether strap
before unlocking brake.
C
The reverse side of the
seat pad has a different
fabric pattern.
21