Britax STRIDER PLUS Manual page 30

BASSINET ASSEMBLY & OPERATION
28. BASSINET ASSEMBLY, FITTING AND REMOVAL - CONTINUED
G
Fasten hook and loop
tabs around the handle
mouldings and stretch the
liner over the other two
corners of the bassinet.
NOTE: The bassinet can only be installed rearward (facing mother position) on the Stroller
frame. The frame will not fold with bassinet installed so it must be removed before folding.
J
Line up plastic
moulding on sides of
Bassinet with sockets
in the middle of Stroller
frame.
30
H
Fold canopy down
(refer to item 28D). Insert
the pad into the bassinet
with head rest located at
the canopy end.
K
Lower the Bassinet
all the way down until it
engages into the sockets
on both sides.
I Attach hook and loop
tabs on canopy to the
liner on both side and in
2 places near the main
locking lever.
L
Ensure Bassinet is
securely locked on by
trying to pull up.