To Adjust Into Seating Positions; To Fit, Use And Remove The Canopy; Harness Adjustment - Britax STRIDER PLUS Manual

SECOND SEAT ASSEMBLY & OPERATION
31. TO USE THE SECOND SEAT - CONTINUED

31.2 To adjust into seating positions

A
Adjust to desired
seating position by using
the one hand backrest
adjusting lever. Lift the lever
all the way up and at the
same time, lift up on the
seat.

31.3 To fit, use and remove the canopy

Refer to section 17. To fit, use and remove the Second Seat canopy is the same as the Stroller
seat canopy.

31.4 Harness adjustment

A five-point harness is provided to restrain your child. To secure the child in the harness,
push buckles (A) through the buckle rings (B) and into the buckle housing (C) until the
buckle prongs snap into position. Carefully adjust the harness by pulling the sliders (D) until
the desired fit is achieved in the lap, shoulder and crotch straps. Always adjust the harness
when changing the seating position of the child. To release the buckle, squeeze the top and
bottom buckle prongs (A).
B
The seat will slide up
and down the frame. Lock
into any one of 4 seating
positions by releasing the
backrest adjusting lever at
the desired position.
41