To Fit The Raincover - Britax STRIDER PLUS Manual

STROLLER ASSEMBLY & OPERATION

27. TO FIT THE RAINCOVER

A1
To fit the raincover to
the Stroller - Place over the
Stroller canopy as shown.
Loop the elastic section
over the Stroller seat leg
support.
A4
The raincover can be
fitted to the Stroller seat
when in forward or rear
facing mode.
A2
Pull the rear raincover
section down between the
handle and down the back
of the Stroller.
B1
To fit the raincover to
the Stroller and Second
Seat - Follow step A1,
then pull the rear raincover
section down between the
handle and over the back of
the Second Seat as shown
above. Attach the hook
and pile as described in A3
above.
A3
Join the hook and pile
around the handle tube.
C1
To fit the raincover to
the Infant Carrier - Place
over the Infant Carrier
canopy as shown. The
elastic section will hang
over the front of the Stroller.
27