To Fit And Remove The Wheel Guards; Rear Wheel Fitting And Removal - Britax STRIDER PLUS Manual

STROLLER ASSEMBLY & OPERATION

2. TO FIT AND REMOVE THE WHEEL GUARDS

A
Position the left and
right guards beside the
frame as shown.

3. REAR WHEEL FITTING AND REMOVAL

A
To fit the rear wheels,
align the wheel axle/
rod with the hole in the
wheel moulding. Push the
rear wheel into the wheel
moulding until it locks into
position.
B
Fit each guard onto the
moulding at the base of the
leg tubes. Push down until
they lock into position.
B
Pull on the rear wheel
to make sure it is locked
on. Repeat steps A & B to
fit the other rear wheel.
C
Pull on each guard
in the direction shown, to
make sure they are locked
on correctly.
C
To release the rear
wheels, press down and
hold the metal release tab.
Then slide the wheel out
and remove. Repeat for the
other side.
9