Varying The Hood; Use With The Infant Carrier - Travel System; Fitting The Infant Carrier - Britax B2 User Manual

4.6 Varying the hood

Opening the hood window 34
Open the Velcro fastener.
Roll up the cover 35 and fasten it
with the retaining strap.
5. Use with the infant
carrier - Travel
System
The B2 can be used as a travel
system with all RÖMER infant carriers
which are equipped with the "Type A"
adapter. It is simply clipped from
underneath into the edge of the infant
carrier.
For the protection of your
child
WARNING!
• Make sure that the
infant carrier is safely connected
with the pushchair.
• Never grasp at the infant carrier to
lift or push the pushchair.
• Always engage the brake before
fitting the infant carrier onto the
pushchair or removing it.
20
14
-6-
5.1 Fitting the infant
carrier
Engage the brake 14 (see
4.1).
Move the backrest 20 of the
pushchair seat to the lie flat position
(see 4.3).
Unhook the cover at the armrests 8.
You can now see the locating slots
26 in the armrests 8.
Fold the cover to the seating
surface.
Lower the infant carrier on the
pushchair rearward facing.
Caution! Never try to fix the infant
carrier on the pushchair forward
facing.
Engage the fixation prongs 28 of
the infant carrier into the fixation
slots 26 either side.
Caution! Make sure that the infant
carrier is safely connected with the
pushchair.
Lower the infant carrier handle to
the rocking position.