Harness Adjustment - Britax STRIDER PLUS Manual

STROLLER ASSEMBLY & OPERATION
17. TO FIT, USE AND REMOVE THE CANOPY - CONTINUED
G
The window cover is
kept in place by a hidden
magnet located at the
bottom of the window
cover.

18. HARNESS ADJUSTMENT

WARNING: Use this harness at all times.
WARNING: Buckle prongs (A) should always be fitted to buckle rings (B).
A five-point harness is provided to restrain your child. To secure the child in the harness,
push buckles (A) through the buckle rings (B) and into the buckle housing (C) until the
buckle prongs snap into position. Carefully adjust the harness by pulling the sliders (D) until
the desired fit is achieved in the lap, shoulder and crotch straps. Always adjust the harness
when changing the seating position of the child. To release the buckle, squeeze the top and
bottom buckle prongs (A). To adjust harness height position, see section 16.
20
H
To open the window
cover, roll up the cover and
secure with the elastic and
toggle.
I
To remove the canopy,
pull the canopy off the
frame mouldings.