To Use The Footmuff - Britax STRIDER PLUS Manual

STROLLER ASSEMBLY & OPERATION
25. TO USE THE FOOTMUFF (PURCHASED SEPERATELY)
NOTE: Always secure the harness through the strap holes before use.
A
To prepare the Stroller
for fitment of the footmuff,
firstly, ensure the head
pillow height is correctly
adjusted for your child,
see section 16. Fold the
canopy back, disengage
one side of the armbar and
rotate to the side of the
frame, see section 12D.
D
Thread the harness
through the slots in the
footmuff. Start by threading
both lap strap buckle
prongs through the pair of
slots in the middle section
of the footmuff.
24
B
Undo the buckle
prongs from the buckle
housing, then release
the buckle rings from the
buckle prongs. Remove
the reversible seat pad &
shoulder pads.
E
The footmuff features
3 pairs of shoulder strap
slots to cater for different
shoulder strap height
positions. Thread the
shoulder strap buckle rings
through the appropriate
shoulder strap slots in the
footmuff.
C
To fit the footmuff into
the Stroller, first unzip
the top section from the
padded bottom section
and set the top section
aside. Place the padded
bottom section into the
Stroller seat.
F
Thread the buckle
housing & crotch pad
through the crotch slot
in the footmuff. Fit the
reversible shoulder pads if
desired.