Ruijie Reyee RG-APF1250 Configuration Manual page 25

Configuration Guide
column.
(2) Click Expand, turn on Band Steering in the expanded settings, and click Save. After the function is enabled,
the client supporting 5 GHz selects the 5G Wi-Fi network preferentially.
2.8 Configuring Wi-Fi 6
Caution
The function takes effect only on APs supporting the IEEE 802.11ax protocol. In addition, access clients must
support IEEE 802.11ax so that clients can enjoy high-speed Internet access experience brought by Wi-Fi 6. If
clients do not support Wi-Fi 6, you can disable this function.
(1) Go to the configuration page:

Method 1: Choose WLAN > Wi-Fi > Wi-Fi Settings. Select the target Wi-Fi.

Method 2: Choose WLAN > Wi-Fi > Wi-Fi List. Select the target Wi-Fi in the list and click Edit in the action
column.
(2) Click Expand, turn on Wi-Fi6 in the expanded settings, and click Save. After this function is enabled, wireless
clients can enjoy faster Internet access service.
16
Wi-Fi Network Settings