Wren Kitchens Infinity Plus Base Unit Fittings Manual page 3

Drilling the ducting cutout
Drill into the corners of the ducting template,
ensuring to stay within the marking.
Cutting the ducting cutout
Starting in the drilled corner, use a jigsaw to
carefully cut along the marking.
Removing the back staples
Using a flat-headed screwdriver, carefully
remove the staples located at the bottom of
the unit.
Any minor damage to the back panel will be
concealed once the unit is positioned against
the wall.
Cutting for the ducting method 1
Cutting for the ducting method 2
Page 3