Circontrol eVolve Smart Series User Manual page 6

1
So, hello!
This manual provides information about the usability and configuration of
the Charge Points, which have been designed and tested to allow charging
electric vehicles, as specified at IEC 61851 standards.
This document has different sections describing electrical components
inside the Charge Point and a step-by-step installation procedure.
It is mandatory to follow the basic security information supplied in this
manual to ensure safe and proper installation.
Failure to follow safety instructions may involve personal injury, equipment
damage and danger of death. CIRCONTROL is not responsible for events
arising from such breach.
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
E L E C T R I C R I S K
This symbol indicates a potentially hazardous situation which,
if not avoided may result in a risk of fire, serious injury or death.
The Charge Point must be disconnected from any power
source before performing any maintenance, repair or electrical
manipulation inside.
A T T E N T I O N !
Follow the instructions preceded by this symbol, if not respect
them or perform them correctly, may result in minor or moderate
injury to the user, damage to equipment, damage to facilities or
other property.
Handling the equipment can cause injuries as result of the
dimension and weight. Persons handling the unit must wear
safety shoes and gloves.
I N F O R M A T I O N
i
It provides useful information to be taken into account.
06
SAFETY INFORMATION IN THIS DOCUMENT
CIRCONTROL — eNext Park & eVolve Smart Series — User Manual