Circontrol eVolve Smart Series User Manual page 23

C)
Connection
Charge Points are delivered with default network setting of "DHCP enabled". It
means that the charge station will try to obtain an IP address from a DHCP server
available on the network.
Connecting a PC directly with the Charge Point needs to be done with static IP
address. The PC and the Charge Point must be in the same network and in the
same range.
In order to change the IP of the Charge Point, open "IP Setup" after connecting
the PC and the Charge Point with the UTP cable.
• Enter the MAC of the device, which can be found on the CCL2 PCB (follow
the image below to locate the MAC)
i
Please note every two digits, the character ' : ' must be written.
23