Circontrol eVolve Smart Series User Manual page 14

4
How to use it?
A)
Before start charging
Before doing anything, the Charge Point's Display shows the following sequence of
messages:
B)
Start charging
The first step is to show the RFID card to the reader
Once done, the led beacon turns Blue and the display shows the following sequence
of messages:
Plug the cable to the vehicle, choose one available socket (in case there are more
than one) and plug the cable to the Charge Point.
If the RFID card reader is disabled, charge transaction starts automatically when
(1)
a vehicle is detected.
14
CIRCONTROL — eNext Park & eVolve Smart Series — User Manual
(1)