Circontrol eVolve Smart Series User Manual page 50

Value
Local authorisation off-line
Allow offline Tx for unknown ID
Stop transaction on invalid ID
Local pre-authorisation
Authorise remote Tx requests
Plug & Charge
Transaction message retry
interval
50
Enabled: during offline period locally-authorized
identifiers are allowed to start charging.
Disabled: during offline period locally-authorized
identifiers are NOT allowed to start charging.
Enabled: during offline period, unknown identifi-
ers are allowed to start charging.
Disabled: during offline period, unknow identifi-
ers are NOT allowed to start charging.
Enabled: stop existing charge transaction after
response from Central System when user is
blocked, expired or invalid.
Disabled: charge transaction does not stop even
if backend rejects the user.
Enabled:
Charge
authorized dentifiers without waiting for the
Central System authorisations.
Disabled: Charge Point requests authorisation
for presented identifiers to the Central System.
Enabled: the Charge Point asks for authorisation
when the Central System sends a remote start.
Disabled: the Charge Point starts the charge
transaction when the Central System sends a
remote start.
No authorisation required.
Number of seconds
message attemps.
*NOTE: setting this value to 0 disables the
attempts.
CIRCONTROL — eNext Park & eVolve Smart Series — User Manual
Description
Point looks
between
for locally-
transaction