Circontrol eVolve Smart Series User Manual page 43

Advanced
This section allows setting the time and region time for the Charge Point.
Also, it offers the possibility to reset the Charge Point in two different ways.
Value
Time zone
Device time
Primary NTP server
Secondary NTP server
Reset
Description
Select the regional time for the Charge Point
according to the locaion.
Current date and time of the Charge Point.
Synchronize the time through internet automatically.
Soft: restart of the Charge Point, closing applications
and clearing any data in RAM. Unsaved data in
current use may be lost but data stored on the hard
drive, applications and settings are not affected.
Hard: also known as a factory reset or master reset, is
the restoration of the Charge Point to the state it was
in when it left the factory.
43