Installing A Fan Interposer Board - Dell PowerEdge HX574 Hardware Owner's Manual

Figure 3-32. Removing and Installing a Fan Interposer Board
2
1
1 screws (2)
3 tabs (2)

Installing a Fan Interposer Board

1 Slip the two securing tabs on the fan interposer board into the two slots on
the side of the fan bay. See Figure 3-32.
2 Secure the fan interposer board with the two screws.
3 Replace the SAS backplane (systems with 3.5" hard drives) or peripheral
interposer board (systems with 2.5" hard drives). See "SAS Backplane" on
page 124 or "Peripheral Interposer Board" on page 128.
4 Install the fans. See "Replacing a Cooling Fan" on page 70.
3
4
2 fan interposer board
4 slots (2)
Installing System Components
133