Installing The Control Panel - Dell PowerEdge HX574 Hardware Owner's Manual

Figure 3-27. Removing and Installing the Control Panel
1
7
6
1 display module
3 control panel board
5 control panel board screws (3)
7 display module screws (2)

Installing the Control Panel

1 Insert the control panel assembly display module into the chassis cutout
and secure it with the two Torx screws.
2 Affix the control panel label to the display module.
3 Install the control panel board in the system chassis and secure with the
three Torx screws. See Figure 3-27.
2 3
2 display module cable
4 control panel board cable
6 display module label
Installing System Components
4
5
121