Installing A Processor - Dell PowerEdge HX574 Hardware Owner's Manual

12 Pull the socket-release lever 90 degrees upward until the processor is
released from the socket. See Figure 3-20.
Figure 3-20. Removing and Installing the Processor
1
1 socket-release lever
3 processor shield
5 socket
13 Open the processor shield and then lift the processor out of the socket.
Leave the release lever up so that the socket is ready for the new processor.
NOTICE:
Be careful not to bend any of the pins on the socket when removing the
processor. Bending the pins can permanently damage the socket and system board.

Installing a Processor

1 Unpack the new processor.
2 Align the processor with the two socket keys on the socket. See
Figure 3-20.
3
2
5
2 processor
4 socket keys (2)
Installing System Components
4
103