Installing A Fan Interposer Board - Dell POWEREDGE EMU01 Hardware Owner's Manual

Figure 3-23. Removing and Installing a Fan Interposer Board
2
1
1 screws (2)
4 slots (2)

Installing a Fan Interposer Board

CAUTION:
Only trained service technicians are authorized to remove the system cover and access any of the
components inside the system. See your Product Information Guide for complete information about safety
precautions, working inside the computer, and protecting against electrostatic discharge.
1 Slip the two securing tabs on the fan interposer board into the two slots on the side of the fan bay. See
Figure 3-23.
2 Secure the fan interposer board with the two screws.
3 Reinstall the SAS backplane. See "Installing the SAS Backplane" on page 89.
4 Install the fans. See "Replacing a Cooling Fan" on page 49.
5 Install the optical drive/diskette drive carrier.
Slide the drive carrier into its drive bay and press in the release latch. See Figure 3-14.
3
2 fan interposer board
4
3 securing tabs (2)
Installing System Components
83