admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section18.fm
2 Press the
3 Press
press the
4 Press
and then press the
0.2 inch* (4
mm*)
0.0–2.0 inch
(0–50 mm)
* Denotes the factory default setting.
5 Press the
Margin Left/Right
To specify the left and right margins of the copy:
1 Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Making Copies From the
Document Glass" and "Making Copies From the ADF."
2 Press the
3 Press
(Set) button.
4 Press
and then press the
0.2 inch* (4
mm)
0.0–2.0 inch
(0–50 mm)
* Denotes the factory default setting.
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
330
Copying
FILE LOCATION: C:\Users\fxstdpc-
(Copy) button.
button until Margin Top/Bottom is highlighted, and then
(Set) button.
or
button or enter the desired value using the numeric keypad,
(Set) button.
Specify the value in increments of 0.1 inch (1 mm).
(Start) button to begin copying.
(Copy) button.
until Margin Left/Right is highlighted, and then press the
or
button or enter the desired value using the numeric keypad,
(Set) button.
Specify the value in increments of 0.1 inch (1 mm).