*1
This item is available only when Auto Registration Adjustment is set to Off.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The method for charging the photo conductor varies with barometric pressure.
Adjustments are performed by specifying the altitude of the location where the
printer is being used.
Values:
Adjust Altitude
Apply New Settings
Restart printer to apply new settings Click this button to restart the printer and apply
Reset Defaults
Purpose:
To initialize wired network data stored in non-volatile memory (NVM). After
executing this function and rebooting the printer, all wired network settings are
reset to their default values.
Values:
Reset
Defaults
442
Understanding the Tool Box Menus
*
0 meter
1000 meters
2000 meters
3000 meters
System
Initializes the system parameters.
Section
User Fax
Initializes the fax number entries in the Address Book.
Section
User Scan
Initializes the e-mail and server address entries in the
Section
Address Book.
Sets the altitude of the location where the
printer is installed.
After you change the settings, click this button
to apply the changes.
the changes.