If Your Machine Does Not Operate as You
Want
The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed. If a malfunction or a
misfeed occurs, the following messages will appear on the display.
❖ When a Message is Displayed
Message
Set the original.
Set the Drum
Unit correctly.
Set the Master
Eject Box cor-
rectly.
Auto-shutdown
occurred due to
power problems.
Press OK to exit.
4. Troubleshooting
Causes
You have not changed the origi-
nal on the exposure glass before
pressing the {Start} key.
An original has not been placed. Place your originals.
The drum unit is not set correctly. Slide in the drum until it clicks.
The master eject box is not set
correctly.
A power problem has occurred. Press {OK} key.
Solutions
Place the next original on the ex-
posure glass or in the ADF.
Make sure that the drum is com-
pletely set in position.
Make sure that the master eject
box is completely set in position.
If it occurs frequently, contact
your customer service.
69