Skip Feed/A3 Paper Feed - Ricoh Priport DX 3343 Operating Instructions Manual

Printing Functions

Skip Feed/A3 Paper Feed

Skip Feed
If the backs of prints are dirty, you
can use the Skip Feed function to
make the drum rotate twice instead of
once with every sheet of paper fed.
This gives you time to remove prints
3
one by one from the paper delivery
tray, or to insert a sheet of paper be-
tween two prints.
Note
❒ You can specify how many times
that the drum rotates when the pow-
er is turned on. Alternatively, you
can also choose whether or not to
change the number of rotations tem-
porarily when the {Skip Feed/A3 Pa-
per Feed} key is pressed. See "Skip
Feed" on p.109 "5 Mode Settings".
❒ The number of rotations can be set
from 2 to 9.
❒ The default is 2.
A
Press the {Skip Feed/A3 Paper Feed}
key.
B
Use the {U}{T}keys to select Skip
Feed, and then press the {OK} key.
60
C
Press the {Start} key.
A3 Paper Feed
This machine can print on A3 size paper.
Note
❒ Although printing on A3L size
paper is possible, the maximum
possible size of the printed image
is 210 × 355 mm. If you print A3L
size originals on A3L paper at
100% magnification, areas of the
printed image will be missing.
❒ The horizontal (upper and lower)
image position are fixed at -10 mm.
The vertical (left and right) print
margins can each be adjusted by
approximately 1 mm.
❒ Print speed is limited to 80 cpm.
❒ A3 Paper Feed is possible for paper
between 52.3 g/m
2
g/m , 42 lb. in weight.
❒ The A3L output tray can store up to
500 sheets of 64 g/m
❒ To load A3L size paper, the Side
pads and Side plate guides must
BFU015S first be removed.
❒ Skip Feed Printing is not possible
when printing on A3L size paper.
❒ A3 Paper Feed cannot be registered
to Memory mode.
ANT128S
2
, 14 lb. and 157
2
, 17 lb. paper.