Ricoh Priport DX 3343 Operating Instructions Manual page 57

Storing Stack Memory Mode Settings
Limitation
❒ To use Stack Memory mode, you
need to first set Memory Mode to
"Stack" using the user tools. See
"Memory Mode Setting" on p.109
"5 Mode Settings".
A
Press the {User Tools} key.
B
Use the {U}{T}keys to select 4
Initial Settings, and then press
the {OK} key.
C
Use the {U}{T} keys to select 7
Program/Change memory, and
then press the {OK} key.
D
Use the {U}{T} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Cancel} key to
return to the previous display,
and then select another number.
E
With the number keys, enter the
BFU014S
number of prints for each class,
and then press the {q} key.
Note
❒ Repeat Steps
all of your classes.
F
Press the {OK} key.
G
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
Printing Functions
D E
and to register
3
51