Print Paper - Ricoh Priport DX 3343 Operating Instructions Manual

Print Paper

The following limitations apply:
Metric
Paper feed tray A3L
B5 JIS LK, A5 L, B6 JIS L,
A6 L
Others (Vertical: 90 - 268 mm,
Horizontal: 148 - 388 mm)
*1
For details about how to print on A3L, see p.60 "A3 Paper Feed".
Note
❒ Paper with a thickness of 47.1 - 209.3 g/m
paper of 52.5 - 81.5 g/m2, 14 - 21.7 lb. is recommended. However, when using
a thickness less than 52.5 g/m
advised to select printing speed to setting 1.
❒ About 1,000 sheets of paper with a 64 g/m
amount that can be set in the paper feed tray. This amount changes depend-
ing on the paper thickness. In general, set paper at a height less than 105 mm.
❒ When using paper that easily curls or waves in humidity, if there is high hu-
midity (more than 80%), set less than 500 sheets in the paper feed tray.
❒ Paper with a length of 90 - 297 mm, 3.5" - 11.7" and width of 140 - 420 mm, 5.5"
- 16.5" can be set in the paper feed tray. However, when using a paper size
that exceeds 275 mm length and 395 mm width, specify A3 Paper Feed. Spec-
ifying this function sets the printing speed to 80 cpm and the print position to
-10 mm, 0.4".
❒ Do not use curled or waved paper. Use paper with less than 5 mm, 0.2" curl
and 3 mm, 0.1" wave.
❒ When paper feed problems arise, try using a slower print speed.
Paper Size
*1
, B4 JIS L, A4 L,
2
, 14 lb. or greater than 81.6 g/m
Inch
" × 14" L, 8 " × 11" L,
1 1
8 / /
2 2
" × 8 " LK, 8" × 13" L
1 1
5 / /
2 2
Others (Vertical: 3.6" - 10.5",
Horizontal: 5.9" - 15.2")
2
, 12.5 - 55.7 lb. can be used. Plain
2
, 17 lb. thickness is the standard
Print Paper
Paper
Weight
47.1 - 209.3
2
g/m ,
12.5 - 55.6 lb.
2
, 21.7 lb., it is
19
1