Ricoh Priport DX 3343 Operating Instructions Manual page 63

❒ Any image closer than 5mm, 0.2"
to the leading edge of the first orig-
inal will not be printed. Also, any
image closer than 4mm, 0.16" to
the leading edge of the second
original will not be printed. When
the image is too close to the leading
edge, make duplicates of the origi-
nals with the image shifted away
from the leading edge, and then
print from the duplicates.
❒ You can select different image set-
tings for the first and second origi-
nals.
❒ Make sure that the paper feed side
plates touch the paper lightly. If
they do not, then the two images
will not be properly aligned on the
prints.
Reference
For details on how to use the op-
tional Auto Document Feeder
when combining originals, see
p.58 "Using the Auto Document
Feeder when Combining Origi-
nals".
A
Place the first original face down
on the exposure glass.
Note
❒ When combining originals, place
the original face down on the ex-
posure glass with its leading edge
towards you, as shown above.
B
Press the {Combine/Repeat} key.
C
Use the {U}{T} keys to select
Combine 2, and then press the
{OK} key.
D
Use the {U}{T} keys to select
original and paper size, and then
press the {OK} key.
E
Press the {Start} key.
F
After the first original has been
scanned, place the second origi-
nal in the same way.
G
Press the {Start} key.
ANT130S
Printing Functions
3
ANT128S
ANT128S
57