Recall Program - Ricoh Priport DX 3343 Operating Instructions Manual

Printing Functions

Recall Program

Note
❒ You can store up to 10 entries for
Memory mode with each entry
containing settings for up to 30
originals (Normal Memory mode),
or settings for up to 30 classes
(Stack Memory mode).
❒ You can store up to 10 entries for
3
Class mode with each entry con-
taining settings for up to 24 combi-
nations of classes and numbers of
prints.
Storing Normal Memory Mode Settings
A
Press the {User Tools} key.
B
Use the {U}{T} keys to select 4
Initial Settings, and then press
the {OK} key.
50
C
Use the {U}{T} keys to select 7
Program/Change Memory, and
then press the {OK} key.
D
Use the {U}{T} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Cancel} key to
return to the previous display,
and then select another number.
E
With the number keys, enter the
BFU014S
number of prints for each origi-
nal, and then press the {q} key.
Note
❒ Repeat Steps
all of your originals.
F
Press the {OK} key.
G
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
D E
and to register