Labconco Protector 3390000 User Manual page 33

Changing the UV
NOTE: For optimum performance, the UV lamp should be changed on an annual basis.
NOTE: The UV lamp and the work area of the cabinet must be thoroughly
decontaminated before removing the lamp.
1. Unplug the cabinet and open the door(s).
2. Thoroughly surface decontaminate the UV lamp and the work area of the cabinet.
3. Remove the UV lamp by rotating it 90 degrees and lifting it straight up and out of its
sockets.
4. Install new lamp by reversing the removal procedure.
THE LAMP(S) IN THIS PRODUCT CONTAIN MERCURY
Manage in accordance with local disposal laws. DO NOT place lamps in trash.
Dispose as a hazardous waste. For information regarding safe handling,
recycling and disposal, consult www.lamprecycle.org
CETTE LAMPE DANS CE PRODUIT CONTIENT DU MERCUE
Éliminez ou recyclez conformément aux lois applicables. Pour de l'information
concernant des pratiques de manipulation sécuritaires et l'élimination sécuritaire
et le recyclage, veuillez consulter www.lamprecycle.org
Lamp:
33