Warm-Up Mode Setting - NEC XG85-XG135LC - 1 Manual

SETTING

Warm-up Mode Setting

This function allows you to automatically warm up the projector
from 5 to 15 minutes when the projector is turned on.
To set the Warm-up mode, proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 61 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "8"
button.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
MODE" item on Page 2, then press ENTER to display the
"WARM-UP MODE" menu.
NOTE: The SETTING MODE has three menus. The "WARM-UP
MODE" item is on the second menu (P02). To access P02 from
P01, press and hold down the CTL button then press
the button; to return to P01 from P02, press and hold down
the CTL button then press the
button to highlight the "8/OPTION"
button to highlight the "1/SETTING
button to select the "WARM-UP
button.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
P02/P03
AUTO POWER ON MODE
WARM-UP MODE
AUTOMATIC DATA STORE
PHOSPHOR SAVER
SIGNAL SWITCHING
84
OPTION – SETTING MODE –
INACTIVE
INACTIVE
DISABLE
OFF
SOUND
MUTE ON
PICTURE
MUTE ON