Setting The Power On Mode - NEC PlasmaSync PX-42XM3W Model Information

PROGRAM TIMER
This sets the day and time at which the power will be
switched ON/OFF as well as the input mode.
Example: Setting so that the power will be switched
on at 8:30 A.M., Monday, displaying RGB2 source,
and switched off at 10:30 A.M.
On "PROGRAM" of "TIMER" menu, select "ON", then
press the MENU/ENTER button.
The "PROGRAM TIMER" screen appears.
Adjust the items.
Each mode switches each time the ZOOM
pressed.
PROGRAM TIMER
DATE ON OFF
MON 08 : 30 10 : 30
— - - : - - - - : - -
- - : - - - - : - -
—
— - - : - - - - : - -
— - - : - - - - : - -
- - : - - - - : - -
—
— - - : - - - - : - -
SEL. ZOOM ADJ.
Information
PROGRAM TIMER settings
DATE: Set the day of the week (e.g. Sunday).
ON (hour, minutes): Set the time at which the power
will be turned on in the 24-hour format.
OFF (hour, minutes): Set the time at which the power
will be turned off in the 24-hour format.
INPUT: Set the input mode that will be displayed when
the timer is on.
FUNCTION: Set the LONG LIFE function.
To reset the program
Align the cursor with the DATE field that you wish to
reset, then press the CLEAR button.
To reset the data
Align the cursor with the field (ON/OFF/INPUT/
FUNCTION) that you wish to reset, then press the
CLEAR button.
Special characters in the PROGRAM TIMER
screen
PROGRAM TIMER
DATE ON OFF
MON 08 : 30 10 : 30
TUE - - : - - 18 : 15
SAT 08 : 30 12 : 15
08 : 30 10 : 00
*FRI
— - - : - - - - : - -
SAT 08 : 30 12 : 15
15 : 30 16 : 00
*
SEL. ZOOM ADJ.
• An asterisk "*" in the DATE field
An asterisk "*" means "every". For example, "*FRI"
means every Friday and "*" means everyday.
• A hyphen "-" in the ON field or OFF field
If any hyphen remains in the ON field or OFF field, the
FUNCTION can not be set.
• A hyphen "-" in the FUNCTION field
A hyphen "-" means last mode (the mode that was last
selected at the time the power was switched off).
/ button is
FUNCTION
INPUT
RGB2 INVERSE
— —
— —
— —
— —
— —
—
—
EXIT
RETURN
INPUT FUNCTION
INVERSE
RGB2
— —
VIDEO1 WHITE
HD/DVD1 —
—
—
VIDEO1 WHITE
RGB1 —
EXIT RETURN
E-25
4-29

Setting the power on mode

This function sets the input mode at the time the power is
switched on.
Example: Setting "VIDEO2"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
On "PWR. ON MODE" of "OPTION3" menu, select
"VIDEO2".
The available sources depend on the settings of input.
OPTION3
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
SEL. ADJ.
Information
PWR. ON MODE settings
LAST: Last input (the mode that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
HD/DVD1, 2: HD/DVD input mode.
DVD2, 3: DVD input mode.
Enabling/disabling the front panel controls
This function enables/disables the front panel controls.
Example: Setting "ON"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
On "CONTROL LOCK" of "OPTION3" menu, select
"ON", then press the MENU/ENTER button.
OPTION3
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
SEL. ADJ.
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
CONFIDENTIAL
3 / 3
: VIDEO2
: OFF
: ON
: OFF
: ALL
EXIT RETURN
3 / 3
: LAST
: ON
: ON
: OFF
: ALL
EXIT RETURN