Table of Contents
Advertisement
PART NAMES AND FUNCTIONS
I PINCUS Button
Press to enter the PINCUSHION mode. You can adjust
the horizontal and the vertical pincushion of the projected
image. Pressing with the CTL button will bring you to the
PIN-BALANCE alignment screen.
J PHASE Button
For service personnel only.
K INPUT Button
Selects menus and switches input signals.
L HELP Button
Press to display the explanation of the current selected
function and available functions.
M INPUT LIST Button
Press to display the memory list of the recorded input
signals.
N INFO Button
Press to display the various parameters and settings of the
currently displayed image. Pressing with the CTL button
displays some of items available in SETTING MODE.
O KELVIN Button
Press to enter the KELVIN mode. You can adjust the
color temperature and, the white and the black level.
P POSITION Button
Press to enter the position mode. You can adjust the
horizontal, vertical position and horizontal, vertical
blanking and image size.
Q R, G, and B Buttons
Turn each CRT beam on and off separately. When using
with the CTL button, you can select the CRT to be
adjusted during convergence and focus adjustments. Note
that the G button is only on the full function remote
control.
R CURSOR Buttons
Used for increasing and decreasing control levels, cursor
movement and convergence adjustments.
S NORMAL Button
Returns the standard level for each signal. When pressed
once, the confirmation message will be displayed. When
"YES" is selected and ENTER is pressed, the data will be
returned to the standard level. While holding down the
CTL button, press the NORMAL button to display the
"LOAD/CANCEL" menu to select either LOAD (last
stored level) or CANCEL (data cancelled).
T STORE Button
Memorizes the adjustments setting of each signal sepa-
rately.
When pressed once, the confirmation message "STORE?"
will be displayed. When selecting "YES" and ENTER, the
data will be stored in memory.
U END Button
Ends the adjustment mode.
V ENTER Button
Executes menu selection and switches to selected input.
W CTL Button
Used in conjunction with other buttons, similar to a shift
key on a computer.
X Remote Control Jack
Insert the plug of the supplied remote cable here when the
full function remote control is used in the wired condition.
Y CAPTION Button
Press to display the CLOSED CAPTION menu.
Z ADDRESS Button
Press to display the ADDRESS menu. Pressing with CTL
allows you to specify the address for the remote control.
10
Advertisement
Table of Contents
